Hire Controller Position Available (Sydney, NSW) More details

AEMC 6255 MICRO-OHMETER

The AEMC 6255 is a robust and accurate 10A low resistance tester (micro-ohmmeter) designed for use both in the field and for plant maintenance.

Manufacturer
Model number
6255
Shipping details
CASE 9kg 52L 41W 21H
Daily rates
Cost per day
$90
$81
$67.50
$56.70
Duration (days)
1-7
8-14
15-28
29-90
Typical Hire Periods
Cost
$630
$1,134
$1,701
$3,402
Duration
week
fortnight
1 month
2 month
All prices are ex-GST
Committing to 3, 6 or 12 months?
Call us on 1300 024 473 for fantastic long term hire rates.

Request to Hire

- +
Retrieving your quote
Cost Estimate
Hire ()
Sorry there has been an error. Please try again
We will be in touch to confirm your order

Got Questions?
Give us a call, we are happy to help.

Description

Utilising a four wire kelvin method of testing low resistance, the AEMC 6255 is extremely accurate, with results to within a tolerance of 0.05%.

Designed to conduct tests on a variety of materials, the AEMC 6255 can test both resistive and inductive materials, with the user able to select the type of test from the front panel. Three different test modes can be easily selected, to take into account the properties of different applications when conducting low resistance testing:

Resistive (instantaneous) Test

The AEMC 6255 will start the test as soon as the test leads are connected and the START/STOP button is depressed. Current is applied to the sample being tested and the connections are checked. The result is displayed on the LCD screen immediately.

Inductive (continuous) Test

If the load being measured is inductive, it is necessary for the voltage to stabilise for an accurate measurement to be taken. In this mode, the test leads are connected and the START/STOP button is depressed to start the measurement. A current is applied and the AEMC 6255 waits for the voltage to stabilise to a certain range. Over time the resistance reading will also stabilise and once the user is satisfied with the result, the test can be terminated by once again depressing the START/STOP button.

Auto (Repetitive) Test

In auto mode, the requirement to depress the START/STOP button is removed, making this an ideal mode for hands free testing. In this mode, the AEMC 6255 will start the test as soon as as the probes make contact with the test sample. The auto mode is ideal for testing when using double hand spike test leads. Each time the probes are removed from the sample, and touched onto another sample, a new test is performed.

When testing is complete, up to 1,500 test results can be stored into the memory and downloaded to a PC for analysis and report generation, with the included DataView software program. The AEMC 6255 can conduct up to 5,000 tests at 10A from it’s internal rechargeable battery, and can test up to 60 minutes at 10A output, meaning that the AEMC 6255 is capable of performing long measurement cycles. Measurements can be initiated from the front panel, or alternatively remote measurements via the communication port (trigger) can also be performed.

 

Key Features:

  • Measure from 1µΩ (0.1µΩ resolution) to 2500.0Ω
  • Test current selection of 1mA, 10mA, 100mA, 1A and 10A
  • Tests up to 60 minutes at 10A
  • RTD temperature probe to check tested sample (optional)
  • Selectable metal types
  • Automatic and manual temperature correction
  • Built in circuit filters out AC signals
  • Two programmable alarm set points
  • Stores up to 1500 test results
  • Selectable inductive or resistive test modes
  • Automatic multiple test mode (multiple tests without pressing the test button)
  • Large multi-line electroluminescent display
  • Local or remote test setup and control
  • Internal rechargeable batteries conduct up to 5000 – 10A tests

 

Applications:

  • Plant maintenance, quality control & field use
  • Aerospace metallic coating resistance measurement
  • Bonding resistance measurement of motors and transformers
  • Bonding verification on earth/ground systems
  • Weld joint integrity verification
  • Contact resistance measurement of breakers and switchgears
  • Aircraft and rail bonding checks
  • Wire to terminal connections and resistance checks
  • Battery strap resistance checks
  • Cable joint and bus bar connection checks
  • Mechanical bond tests

 

Specifications:

Operation: Central rotary switch and function keys Working temperature range: -10 °C … +50 °C

Operating temperature range: 0 °C … +35 °C Nominal temperature range: 18 °C … +28 °C Storage temperature range: -30 °C … +60 °C

Battery life span: 5 hours or 1000 tests

Weight: ≤ 4 kg without accessories ≤ 5.5 kg incl. accessories and batteries in carrying case Case material: NORYL, shock -and scratch proof thermoplast

 

Resources & Downloads

Hiring with Brandis Hire is easy

1

Find your Gear (and rates)

Browse our range to find the equipment you need. Select your hire dates and get instant pricing

2

Submit a Booking Request

Provide your details and submit your hire request online in minutes. We will be in touch to confirm everything

3

Pick up or we deliver

Your gear will be prepared and ready for you to collect, or let us take care of shipping direct to you

Proudly 100% Australian family-owned & operated

Brandis Hire can help!

We’re here to help make hiring technical equipment easy!

No lock-in hire periods

4 hours FREE technical support

Delivery and pickup options available

We care about our customers

Download

Download full price list

By entering your email address, you agree to sign up to occasional marketing communications from Brandis Hire.

"*" indicates required fields

By entering your email address, you agree to sign up to occasional marketing communications from Brandis Hire.

Just added to your Hire Request!
AEMC 6255 MICRO-OHMETER