Crystal Digital Test Gauge 100 PSI

The XP2i’s case is made from rugged aluminium alloy utilizing a gasket to seal the enclosure against dust and water intrusion. Even the RS-232 connector is fully sealed (with or without the red cover or rubber boot). Circuitry is mounted in shock absorbing elastomer supports and the batteries are easily accessible by removing four screws. But you won’t need to change the batteries often, since 3 AA batteries operate the XP2i for up to 1500 hours of continuous use.

Key Features:

• Continuous capture of peak and valley pressure readings
• PSV mode
• Programming interface
• User-defined units
• Intrinsically Safe
• All welded 316 stainless steel sensor
• Calibration due reminder

Overpressure Conditions: The XP2i will read pressure up to approximately 110% of the rated pressure range

Measuring Vacuum: ranges of 300 psi (and 20 bar or 2000 kPa

Accuracy – Gauge Pressure: 0 to 20% of Full Scale ±(0.02% of Full Scale). 20 to 100% of Full Scale ±(0.1% of Reading).

Vacuum to Full Scale: (0.02% of Full Scale*) 15 to 25° C ± (0.05% of Full Scale*) -10 to 15° C, 25 to 50° C, typical

Dimensions (instrument only): 210mm x 170mm x 100mm

Weight: 2kg