Fluke FLK-FEV300 TY1 & TY2

The Fluke FLK-FEV300 TY1 & TY2 is an EV charging test adapter kit with Type 1 and Type 2 connectors used to verify the function and safety of AC charging stations (Mode 3).

It simulates an electric vehicle to trigger charging, enabling voltage and current testing when used with tools like an installation tester or ScopeMeter.

Supports compliance testing to IEC/EN 61851-1 and IEC/HD 60364-7-722 standards.

Need dependable equipment for your next project? Hire now to enjoy fast delivery, flexible rental options, and expert support every step of the way. Get the right products when you need them. Secure your rental today on 1300 024 473.

Click here to explore our range of Electrical Testing Equipment and find what you need!

• Suitable to vehicle charging stations with charging mode 3
• Fits to charging stations with EV socket-outlet type 2 and EV-connectors for type 2 and type 1
• PE Pre-Test: With this safety feature, the PE conductor will be tested for the possible presence of dangerous voltage against earth.

• Input voltage Up to 250 V (single phase system) / up to 480 V (three phase system), 50/60 Hz, max 10 A
• Internal power consumption 3 W max.
• FEV300-CON-TY2 Plug AC charging mode 3, suitable to IEC 62196-2 type 2 socket outlet or fixed cable with vehicle connector (type 2, 7P three-phase)
• FEV300-CON-TY1 Plug AC charging mode 3, suitable to IEC 62196-2 type 1 or SAE J1772 with vehicle connector (type 1, 5P single-phase)
• Dimensions (H × W × D) 110 × 45 × 220 mm length without connection cable and test cable
• Weight (including type 1 or type 2 connection cable) Approx. 1 kg
• Safety standards IEC/EN 61010-1, pollution degree 2
• IEC/EN 61010-2-030, CAT II 300 V, protection class II
• Ingress protection IEC 60529: IP54 (housing)
• IEC 60529: IP54 (sockets with protection caps in place, connectors in connected condition or with protection caps in place, otherwise IP20)
• Operating temperature -20 °C to 40 °C
• Storage temperature -20 °C to 50 °C
• Operating humidity range 10 % to 85 % relative humidity non-condensing
• Storage relative humidity 0 % to 85 % non-condensing
• Operating altitude 2000 m max.

Perform a variety of tests including ground fault checks, insulation of wires, measuring voltage and duty cycle to see max current available for charging all in one adapter that safely integrates with the Fluke portfolio of test and measurement tools. The FEV300 allows you to simulate CP (E) and PE (Earth Fault) error and includes separate phase indication by three LED lamps for easy check if voltage is present. There is no need to bring an electric vehicle onsite for charging station troubleshooting: the adapter acts as an electric vehicle when connected to a charging station for easy performance and maintenance testing.

• PE Pre-Test Visible indication >50 V AC/DC between PE conductor and touch sensor
• PP Simulation Open, 13 A, 20 A, 32 A, 63 A
• CP States State A, B, C, D
• CP Error state “E” On/off (CP signal short-circuited to PE)
• PE Error state “F” (Earth fault) On/off (interruption of PE conductor)
• Outputs (for test purpose only)
• Measuring terminals L1, L2, L3, N, PE Max. 250/480 V, max. 10 A
• CP signal output terminals Approx. +/-12 V