FSM-70S Splicer & Cleaver set

Fujikura FSM70S single fibre core alignment fusion splicer and CT30A cleaver. Typical splice losses of 0.02dB and 0.01dB on single and multimode fibre respectively. Automated tension test, wind and heater cover, 7 second splice time and 14 second heat time. 

Specifications

Model: 70S+ Fusion Splicer

Applicable Fibers: Single-mode (G.652 & G.657), Multimode (G.651.1), DS (G.653), CS (G.654), NZDS (G.655 & G.656) and Erbium-doped fiber

Cladding Diameter: 80 – 150 μm

Coating Diameter: 100 μm to 3,000 μm

Fiber Cleave Length: 5 to 16 mm

Typical Average Splice Loss: 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards

Splicing Time: ULTRA FAST mode — 6 seconds; SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds; AUTO mode — 15 seconds with SM fiber

Arc Calibration Method: Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available

Splicing Modes: 100 preset and user programmable modes

Splice Loss Estimate: Based upon dual camera core axis alignment data

Storage of Splice Result: Last 2,000 results stored in the internal memory

Fiber Display: X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation

Magnification: 320X for single X or Y view, or 200X for X and Y view Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor

Operating Condition: 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively

Mechanical Proof Test: 1.96 to 2.25N

Tube Heater: Built-in tube heater with 30 heating modes; auto-start function

Tube Heating Time: Typical 13 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves

Protection Sleeve Length: 60 mm, 40 mm, micro

Splice/Heat Cycles with Battery: Typical 200 cycles with power save functions activated Electrode Life 5,000 Arc Discharges

Power Supply: Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery

Terminals: USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03

Wind Protection: Maximum wind velocity of 15 m/s. (34 mph)

Dimensions: 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches)

Weight: 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery