Hioki 3554-52

Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554-50 battery internal resistance tester sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals.

Features

• Battery measurement can be performed while the battery is connected to its host device, without taking it offline
• Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554
• Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage (*1)
• Noise reduction technology improves noise resistance
• Screen and audio (*2) guidance simplifies measurement
• Measurement data is linked to site information and saved, reducing management man-hours
• Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross (*3) or to an Excel® file. (Wireless Adapter Z3210 is necessary)
• New protector delivers better ergonomic hold and durability in the field.

Specifications

Resistance measurement range:

• 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
• Accuracy: ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt)
• Testing source frequency: 1 kHz ±30 Hz
• With function for avoiding noise frequency enabled: 1 kHz ±80 Hz
• Testing current: 160 mA (3m/30 mΩ range), 16 mA (300 mΩ range), 1.6 mA (3 Ω range)
• Open terminal Voltage: 5 V peak

Voltage measurement range

± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges, Accuracy: ±0.08 % rdg ±6 dgt

Temperature measurement accuracy

Measurement range: -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F), Measurement accuracy*: ±1.0°C (±1.8°F)

* When using the Clip Type Lead with Temperature Sensor 9460.

* When using the Temperature Probe 9451, add ±0.5°C (±0.9°F) (cable length: 1.5 m [59.1″]).

* When using the Temperature Probe 9451S, add ±0.5°C (±0.9°F) (cable length: 0.1 m [3.94″]).

BT3554-50 standalone accuracy with simulated input: ±0.5°C (±0.9°F)

Absolute max. input voltage: 60 V DC max. (No AC input)

Measurement time: 100 ms

Response time: Approx. 1.6 sec.

Comparator:

• Compares measured values with set threshold values to make judgments and reports them to the user.
• Judgment notification method: Results are displayed as shown below (segment) and beeping tones sound
• When the Voltage value (high): Resistance value (low)= PASS, Resistance value (medium)= WARNING, Resistance value (high)= FAIL
• When the Voltage value (low): Resistance value (low)= WARNING, Resistance value (medium)= WARNING, Resistance value (high)= FAIL
• If the judgment result is WARNING or FAIL, the audio tone is accompanied by a red backlight.
• User-selectable voltage judgment method: ABS (absolute value judgment), POL (polarity judgment )
• Savable settings: 200 tables

Memory functionality:

• Operation: Save, load, and delete measurement data, Save and delete profile information, Number of data sets: 6000, Memory architecture: 500 data sets per unit (12 units)
• Saved data: Saved measurement data is linked to profile information.
• 1. Measurement data: Data can be saved, loaded, and deleted by operating the instrument.
• 1. Date and time
• 2. Resistance value, voltage value, and temperature
• 3. Comparator threshold value and judgment result
• 2. Profile information: Profile information can be saved, loaded, and deleted using a supported application (GENNECT Cross or GENNECT One).
• 1. Profile numbers: 1 to 100 (Data (2), (3), and (4) below are saved for each profile number)
• 2. Location: User-defined comment such as location of UPS
• 3. Device information: User-defined comment such as UPS management number
• 4. Battery number: 1 to 500 (start number, end number)

Measurement Navigator

Operation: Announces the next battery number to be measured via a screen display and audio guidance.

Audio output is generated by a connected mobile device when using the Z3210 and a supported application (GENNECT Cross).

Preparations: Profile information that’s been registered with a supported application (GENNECT Cross or GENNECT One) must be transferred to the instrument.

Communication interface: USB, Bluetooth® wireless communications (when Z3210 installed)

Other functions: Temperature measurement (-10.0 to 60.0 °C), Zero-adjustment, Hold, Auto-hold, Auto-memory, Auto-power-save, Clock

Power supply:

• LR6 (AA) Alkaline dry battery ×8,
• Continuous operating time: About 8.3 hr. (without Z3210 installed), About 8.2 hr. (with Z3210 installed and wireless communications active)