Fluke 80i 2010s AC & DC Current Clamps

Fluke 80i-2010s allows you to measure up to 2,000A AC and/or DC on large conductors with 0.8% accuracy. The 80i-2010S provides a convenient way to measure current without having to disconnect the load.

Specifications

General Specifications

Modules: 80i-2010s

Dimensions: 110 mm x 270 mm x 46mm

Weight: 0.710 kg (1.6 lbs), including battery

Output Cable: 1.5 m (60 in) Shielded Coaxial cable with BNC plug

Maximum Conductor Size: 52.0 mm (2.05 in)

Maximum Jaw Opening: 81.5 mm

Output to Zero: Auto adjustment with Zero button

Temperature Operating: -10 °C to 50 °C (14 °F to 122 °F)

Storage (battery removed): -30 °C to +60 °C (-22 °F to +140 °F)

Operating Humidity: ≤ 90 % RH (at 10 °C to 30 °C) ≤ 75 % RH (at 30 °C to 40 °C) ≤ 45 % RH (at 40 °C to 50 °C)

Operating Altitude: 2,000 m (6560 ft)

Storage Altitude: 12,000 m (40,000 ft)

Demagnetize Clamp: Open and close the Clamp jaws several times with soft click, use of the clamp on uninsulated conductors is limited to 1000 Vac rms or DC and frequencies 1 kHz or less.

Safety: IEC 61010-1, Pollution Degree 2, IEC 61010-2-032: CAT III 1000 V /CAT IV 600 V

Ingress Protection: IEC 60529, IP40

Power Supply Type: 2 x AA alkaline battery, IEC LR6

Battery Life: 150 hours (typically)

Low battery indicator: Yes

Electrical Specifications

Current Range: 2000 A ac rms, ± 2000 A dc

Output Sensitivity: 01 mV/A

Accuracy: ± 0.8 % of reading ± 0.2 % of range

Bandwidth for Accuracy Specification: DC to 400 Hz

Load impedance: >1 MΩ and <10 pF

Frequency Response (small signal): DC to 20 kHz (-3 dB)

Temperature Coefficient: 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C

Working Voltage: 1000 V AC RMS or DC