IDAX is an insulation diagnostic instrument based on DFR (Dielectric Frequency Response), also known as FDS (Frequency Domain Spectroscopy). DFR technology is an established test procedure in laboratories that, in an innovative effort by Megger, has been adapted for field use in the IDAX range of instruments. In short, DFR is the measurement of capacitance and losses (tan delta or power factor) over multiple frequencies. The measured DFR curve is dependent on insulation geometry, moisture, oil conductivity, and temperature. By advanced curve fitting to the reference material model, it is possible to calculate moisture content in solid insulation, the oil’s conductivity at 25 °C (reference temperature), and tan delta/power factor at 20 °C (reference temperature). In the calculations, ITC (Individual Temperature Correction), another important Megger innovation is used to translate test data from the test object temperature to the reference temperatures. The IDAX software incorporates an ITC corrected frequency sweep specifically designed for assessment of instrument transformers and bushings.
Thanks to a novel approach to the combination of time and frequency domain data, IDAX provides the shortest measurement time in the marketplace for a full DFR measurement from 1 kHz to 10 µHz. Separate reference models are fitted to each data set (time or frequency) prior to transformation and combination, which eliminates the risk of artifacts introduced by approximations or transformation of incomplete data sets. IDAX is exceedingly easy to use with an automated test flow and presentation of results that uses an easy-to-understand ‘traffic light’ system. The IDAX DFR method is now part of international guides and standards e.g., Cigre TB 254, Cigre TB 414, Cigre TB 445, Cigre TB775, IEEE C57.152-2013, IEEE C57.161-2018 IDAX is available in multiple versions IDAX300 – A compact and light 3-channel input (red, blue, and ground), 3 terminal (generator, measure and guard) and one ammeter instrument for use with an external computer that runs the IDAX diagnostic software. IDAX300/S – As IDAX300 but with two ammeters for two simultaneous measurements. IDAX350 – As IDAX300/S but housed in a rugged and waterproof case together with an on-board computer that can also be used to control other Megger instruments. For extended applications, IDAX interfaces seamlessly with VAX high voltage amplifiers; VAX020 for 2 kV and VAX220/230 for 20/30 kV (on request).
Operation: Central rotary switch and function keys / front LCD screen for operation.
Operating temperature range: 0 °C … +35 °C Nominal temperature range: 18 °C … +28 °C Storage temperature range: -30 °C … +60 °C
Weight: ≤ 6 kg without accessories ≤ 5.5 kg incl. accessories and batteries in carrying case.